Standard extent of supply

• submersible motor pump with adjustable cutting device (CSP)
• spiral housing and suction bell made of cast iron
• CSP: Impeller and cutting disc made of chrome steel
• ESP: Impeller made of spheroidal cast GGG60
• pump shaft made of stainless steel with angular ball bearing
• three phase current - submersible motor 4-polar for 400/690V/50Hz / IP 68 with 8m cable 12G x 2,5² 1m cable protective tube and strain relief
• sealing on motor end: mechanical seal in oil bath
• sealing on pump end: closed and stainless steel mechanical seal
• motor temperature class H, with triple PTC resistor 150° C, for thermic winding protection
• medium temperature up to 40° C
• leakage sensor extends into oil reservoir (additional motor protection )
• motor and cable strand on junction plate, strand of leak oil sensor and PTC on ceramic clamp interconnected in a terminal box casted in casting compound
• motor protection guaranteed by the original BAUER control system (accessory) with installed thermistor release relay for PTC resistors and overcurrent relay, as well as electronic monitoring system for leakage sensor
• DN 80

Technical detail